Main fishing gear equipment, carbon products equipment, golf equipment, trekking poles, ski poles and other sports equipment equipment

The process flow of the glue dipping machine

With the continuous expansion of the application scope of coating glove dipping machine, the sales of the product is higher and higher. Many manufacturers will choose to use glove dipping machine for production, which is conducive to improving production efficiency. Do you know the process flow of the glove dipping machine? Let me tell you about it.


Do you know the process flow of the glove dipping machine?

1. In the process of operating the glove dipping machine, a button knife will be used to cut the flannelette into cloth pieces.

2. Gaomi Zhihui glove dip machine manufacturers tell you to sew the cut cloth into gloves.

3. The gloves need to be put on the mold of the glove dipping machine before the next process can be carried out.

4. The whole assembly line of the glove dipping machine is run to the water tank and impregnated with calcium water.

5. Bake in the oven at 50C for 20 minutes.

6. Gloves dipping machine dipping nitrile latex.

7. Continue to push the soaked gloves into the oven and bake at 60 to 80 degrees Celsius for 60 minutes. Glove dipping machine manufacturers need to be divided into primary dipping and secondary dipping according to the needs of glove surface and thickness.

8. According to the introduction of the glove immersion machine manufacturer, latex, sulfur, zinc oxide, accelerant, antioxidant and diffuser should be mixed evenly in a certain amount to make latex.

9. The specified quantity of gadolinium polyacrylate was added to the dispersant and stirred for about 1 hour at room temperature to obtain the dispersant containing gadolinium polyacrylate.

10. At the same time of constant stirring, the manufacturer of the glove dipping machine reminds everyone to cherish and slowly add the prepared dispersing liquid containing polygadolinium acrylate to the prepared latex.

11. Before operating the glove impregnation assembly line, the glove mold must be impregnated with a coagulant and then dried at 120 ° C for two minutes.

12. Resoak the glove mold from the previous step in latex for 12 to 15 seconds.

13. After the glove mould of the glove dipping machine is soaked, it needs to be dried again.

14. Dip the coating gloves of the glove dipping machine into the chlorine pool for chlorination or into the starch pool to make the surface stick with starch.

15. After the production of the glove dipping machine, peel the gloves from the mold and make the gloves soaked in chlorine water or starch water face inward to get the finished product of the adhesive dipping protective gloves.


Related News

The invention relates to a production method of a demoulding machine

Stents are widely used in work and life, such as camera tripods and heart stents used in the medical field. However, an injection mold is used in the manufacturing process of the scaffold, and after injection molding, a demoulding mechanism is used to separate the material from the injection mold. However, the general demoulding mechanism has some disadvantages in use. The general demoulding mechanism is not convenient to eject the material in the injection mold of different brackets.

The invention relates to a manufacturing method of hook type demoulding mechanism

Mould is the basic technological equipment of manufacturing industry. Because the technical level of the mold determines the product quality and production efficiency to a great extent, the technical level of the mold production has become an important symbol to measure the product level of an enterprise. Demoulder occupies an important position, demoulder should be timely in place, otherwise it will affect product quality and production efficiency. The existing demoulding machine is generally completed by the discharging screw, removing template and spring, the demoulding speed control is not good easy to appear material jumping phenomenon.

What is indoor golf simulation equipment

Indoor analog golf equipment generally includes: software, sensors, putter systems, projectors, curtains, transmission lines and other display systems.

Golf mold composition and principle

Indoor golf mold is mainly composed of golf flight parameters measurement part and golf course three-dimensional simulation display part. The golf mold - the measuring part of the technical parameters of the golf ball flight is composed of a two-channel measuring control device and a central controller of the computer system. The two parts are grouped together into a golf measurement section,

Features of Golf Mould

The characteristics of the golf mold Golf mold also refers to the golf simulator, the following is a brief introduction to the characteristics of golf mold:

Structure and composition of stripper

Mold is refers to by injection, blow molding, extrusion, smelting, casting or forging forming, stamping, stretching method to get the desired product, such as stripper in industry production of various molds and tools, in a nutshell, mold consists of various components, different mould made up of different parts, so, the following together to understand the structure and composition of stripper!