Industry information

Release time:

2022/09/28 08:54

There are various sizes of prototypes in the demoulding machine test, and manual alignment is required, which is inconvenient to operate. In view of the above problems, before designing the stripper test, the experimental pairing was realized, which brought great convenience to the test. Then let's learn about the technical implementation of the stripper!

Elements of demolding machine technology realization:

The demoulding machine is a kind of demoulding machine that can accurately locate the test mold and demould the test pieces of various sizes.

The technical solution of the demolding machine to achieve the above purpose is as follows.

The stripping machine is composed of stripper, positioning plate, column, slider, spring, control box, control panel and lead screw. The hole diameter of the two stripper plates is 155mm, and other stripper plates can be added in the middle of the two stripper plates. The diameter is 105mm and they are bolted. The stripper plate is fixed on the lead screw and is stripped as the lead screw descends. The bottom is fixed with a spring, the slider and the spring are sleeved on the lead screw, and the positioning plate is sleeved on the lead screw, and the height of the positioning plate can be adjusted. The hole on the positioning plate is 165mm in diameter and is used to position the Marshall test piece. Other positioning plates can be added to the positioning plate, the diameter is 115mm, they are fastened with bolts, and the diameters are 152.4mm and 101.6mm respectively relative to the admit card type. The column diameter is 95mm, and there are also circular ring plates mounted on the column. The outer diameter is 145mm, and the diameters corresponding to the trial models are 101.6mm and 152.4mm, respectively.

The specific embodiment of the demoulding machine further describes the patent of the present invention in detail:

The demoulding machine places the test piece on the column, adjusts the height of the positioning plate, and inserts the Marshall test piece into the positioning hole for positioning. The control panel can control the descending, ascending and stopping of the lead screw, and the lead screw fixing the stripper plate descends to make the stripper plate move down. After the stripping plate is close to the front end of the Marshall mold, press the stop button, fine-tune the Marshall specimen according to the hole diameter, align it, and press the start button. This step is omitted for demolding. After demolding is completed, the sliding and spring system of the test piece can also be removed. The height can be adjusted according to the demolder. As the ejector is pressed downward, the height of the spring drops, the positioning plate drops downward, and the demolding is completed.

Technical features of stripping machine:

The stripping machine is composed of stripping plate, positioning plate, column, slider, spring, control box, control panel and lead screw. The opening diameter of the two stripping plates is 155mm, and other stripping plate asphalt is set in the middle of the two stripping plates. The stripper positioning plate for mixed material test pieces is characterized in that the stripper is fixed on the lead screw and demolded as the lead screw descends, the stripper positioning plate can be embedded in the slider, and the height of the positioning plate can be adjusted. The hole on the positioning plate is 165mm in diameter and is used to position the Marshall test piece. Other positioning plates can be installed on the positioning plate. 115mm in diameter, they are bolted on, the struts are 95mm in diameter, and there are ring plates that fit over the struts. The outer diameter is 145mm and the inner diameter is 95mm.

Stripping machine for asphalt mixture test pieces, characterized in that the positioning plate can easily position the Marshall test piece, characterized in that the slider and spring system can adjust the height to fit the stripper plate, and the spring height decreases as the stripper plate is depressed , the demoulding process is completed.

The above is the technical realization of the stripping machine. If you want to know more, please feel free to contact us!

MORE...

Disclaimer: The content is forwarded from the Internet. This website does not own the ownership and does not assume the relevant legal responsibility. If you find any content suspected of plagiarism on this website, please go to Contact Us to report and provide relevant evidence. Once verified, this site will immediately delete the allegedly infringing content.

Previous:

Next: